2.7inch E-Ink display HAT for Raspberry Pi, three-color
$300.00
E-Ink (Electronic Ink) display has several benefits compared to other display technologies:
- High Visibility and Contrast
- Wide viewing angle
- and super low power consumption. It can retain the display for a very long time after power is removed
This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264×176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.
Interface
Dimensions:
Features
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Compatible with:
- Raspberry Pi 4 Model B
- Raspberry Pi 3B+
- Raspberry Pi 3B
- Raspberry Pi Zero WH
- Raspberry Pi Zero W
- Raspberry Pi Zero
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
- Stack perfectly on Raspberry Pi 4B/3B/3B+ via the 40-pin GPIO header.
Specifications
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 73.50 × 56mm
- Display size: 57.288mm × 38.192mm
- Dot pitch: 0.217 × 0.217
- Resolution: 264 × 176 pixels
- Display color: red, black, white
- Grey level: 2
- Full refresh time: 15s
- Refresh power: 26.4mW(typ.)
- Standby Current: less than 0.01uA (almost none)
- Standby power: 170°
Packing List
- 1 x 2.7inch E-Ink display HAT (3 colors) board
- 1 x 8-way JST plug to pigtail jumper wire (female socket terminated)
- 4 x 15mm spacer (2.00 mm diameter) with screws and nuts
Resources
Related products
-
Argon NEO Pi 4 Raspberry Pi Case
$200.00Add to cartThe Argon NEO is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B. Slim aluminium enclosure Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics. Passive cooling The case acts as passive cooling for the high demands of the Raspberry Pi 4 Model B. …
-
Raspberry Pi Compute Module 4 Antenna Kit
$200.00Add to cartThis antenna kit is launched in conjunction with the Compute Module 4 from the Raspberry Pi Foundation. CM4 with built-in wireless models comes with an onboard U.FL connector for an external antenna, thus this antenna kit. This Antenna Kit is certified for use with the Raspberry Pi Compute Module 4. If a different antenna is used, then separate certification …
-
Official Raspberry Pi Zero Case
$50.00Add to cartWhen we get this case from Raspberry Pi Foundation, it surprised us! We need to send kudos to them 🙂 This case is super nice with the color matching, shape, and design consideration behind it. Yes, adding a camera port and built-in Wireless (WiFi and Bluetooth) to the already awesome Pi Zero was a brilliant move. …
-
CM4 IO Smart Case
$200.00Add to cartCM4 IO Smart Case is to convert Raspberry Pi Compute IO Board into a real industrial computer. CM4 IO Case is a kit which specially designed for Raspberry Pi Compute Module 4 IO Board. It can turn Compute Module 4 & IO Board into a commercial industrial computer for the end applications. 1. Key Features: One-Click …
Reviews
There are no reviews yet.